Best Table Saw Worth Purchasing in 2019

Best Table SawAs a good woodworker, you need a good saw for cut down the wood perfectly. But with the wide array of choices and price range, you might get confused. Which is the best table saw? Which features should I look the most? And so on.

That’s why to figure out which is the best table saw for you, we have done the hard work and reviewed a few table saws, so that you can make a clear decision and figure out which model is right for you.

We’ve also added a buyer’s guide which will help you to gain more clear in-depth ideas on table saws. Here is the list of 5 Best tables saw that we have reviewed. Check all the table saws and find the one that suits your preference for the upcoming project.

5 Best Table Saw 2019 – Reviews

Best Table SawPrice
SawStop PCS175-TGP236 1.75-HP
(Editor’s Choice)

Check Price
DEWALT DW745
Check Price
DEWALT DWE7491RS
Check Price
Bosch 4100-10
Check Price
SKIL 3410-02
Check Price

No.1 DEWALT DW745 10-Inch Compact Job Site Table Saw

DEWALT DW745 10-Inch Compact Job Site Table Saw

If you are looking for a compactness and efficiency job site model than just a cutting tool, DEWALT DW745 might be the best option for you.

It is the smaller version of the DEWALT DWE7491RS  but still able to deliver the same power and consequently, the same speed as the larger model.

It is lightweight and regarded as one of the best portable units in its category. while it doesn’t have wheels, the steel roll cage plays a crucial role and help it to survive travel without drop and damage.

A powerful 15amp Motor

For heavy duty like hardwood cutting and pressure-treated lumber, a table saw needs a powerful motor, and a 15amp high-torque-motor certainly doing the job here.

With the powerful motor, this DEWALT table saw able to delivers the power you need for any heavy task and DIY projects.

The saw’s 10-inch, 24-tooth carbide blade spins at a no-load speed of 3,850 rpm for quick, clean cuts no matter what the task is.

Huge 20 inch larger rip capacity

If you suppose to cut a larger material, with DEWALT DW745’s large rip capacity it becomes more comfortable.

The saw’s features an exclusive 20-inch rip capacity. Rack and pinion fence rails make the fence adjustments for fast, smooth, and accurate cuts.

The fence’s telescoping design allows the rails to move out to 20 inches to rip full sheets of materials or be retracted for an easy compact design for transportation. The maximum cut depth this saw features is 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees.

Some other features and specifications

  • The cast table top design ensures accuracy and precision whereas the overload protection system ensures powerful performance in hard. The quick bevel lock with large scale help for easy, accurate adjustments.
  • With the 20-inch of the rip, you can easily cut a variety of larger shelving and trim materials.
  • Metal roll cage base provides greater durability than plastic bases.
  • The blade can be adjusted 0 to 45 degrees for bevel cutting.
Pros
  • Convenient guide system
  • Powerful performance
  • Easily portable
  • Can handle heavy task comfortably
Cons
  • Table size
  • Cheap miter guard
Though it can handle rips up to 20-inch, so something more than that can’t possible to  cut down. Blade housing sometimes tends to go off center, which is not good from a user point of view. Otherwise this a great product to purchase considering its accuracy and performance in this line segment.

No.2 DEWALT DWE7491RS Table Saw

DEWALT DWE7491RS Table Saw

What else encourage you more than seeing your favourite weapon at the job site. DEWALT doing that job for you. As a leading manufacturer of industrial power tools and accessories, it guarantees in its products qualify for the for the interest of customer satisfaction.

If you are looking for a somewhat portable and versatile table saw, then DEWALT DWE7491RS might be the one, on which you can take an interest.

Rip Capacity And Rolling Stand Feature

This saw features a rack and pinion fence system which makes fence adjustments fast, smooth and convenient.

It also features a 32½-inch rip capacity which can easily cut a variety of larger shelving and trim materials and the patented material support allows this to be used for narrow rip cuts.

The presence of 15amp Motor can easily rip through hardwood like a hot knife through butter. Just guide it and it will do all the hard works for you.

Easy Portability

The rolling stand is well designed for easy setup and the set of wheels on this model is great for moving it from one place to another with fewer efforts.

The folding legs are also superior to the support systems on other models, and they make it so that you always get a stable platform to work on, without adding too much weight to the machine.

Some other features and specifications of

  • With the help of 2-inch dust collector port, it can easily connect it to a vacuum and extract the dust efficiently and without much hassle.
  • This saw offers 3-1/8 inch depth of cut at 90° and 2-1/4 inch at 45°.
Pros
  • Easy to use
  • Portable
  • Presence of a dust removal port.
  • Adjustable fence
  • Suitable for both wide and narrow rip cuts.
Cons
  • Table size
  • Non-flat table top
  • Parallel blade adjustment little difficult
Overall this saw is well designed, with quality parts throughout. Everything fits perfectly and all the controlsand switches are of high quality. However, it is the rack & pinion fence that is so ingeniously designed which attracts lots of costumes towards it.

No.3 Bosch 4100-10 10-inch Table Saw

Bosch 4100-10 10-inch Table Saw

Bosch 4100-10 table has it all in terms of design, precision accuracy and easy to use a setup that a buyer could want to see in the best table saw.

It has a riving knife system which helps in high material controls and visibility in cutting. The blade is designed with anti-kickback pawls for protection when a kickback occurs.

Gravity rise design

The gravity rise design allows you to push the device around easily and focus more on getting the job done instead of wasting time on trying to set up a complicated device.

With the collapsible table saw stand, you can adjust the height as per your specific needs. While the 8-inch threaded pneumatic wheels add mobility to it.

Large rip capacity

Bosch 4100-10 inch table saw features a larger cutting table surface area and can handle ripping capacity up to 25 inches wide. It also provides high-precision cutting as well as efficient power with 3,650 no load RPM motor. Which can faster your work efficient 10 times than it was before?

Some other features and specifications of Bosch 4100-10

  • Seamless integration with the lighter GTA47W Gravity-Rise Wheeled Stand for easy mobility from job site to job site, with single-action setup and take down
  • 4100 worksite table offers high-precision cutting as well as efficient power.
  • The Bosch 4100-10 model weighs 60 pounds with 120V and a 6- inch corded length for an electric power source and accessories.
Pros
  • Built with gravity rise design
  • Powder coat finish
  • Collapsible design
  • Easily portable
Cons
  • Tough to adjust the blade and rip fence parallel.

With this fine piece of engineering, you can focus more on work and will finish it easily. With the heavy-duty steel folding stand, setup and storage will become even more convenient.

No.4 SKIL 3410-02 10-inch Table Saw

SKIL 3410-02 10-inch Table Saw

If you are looking for the best table saw that cannot only provide you with the quality performance but also pocket-friendly, then SKIL 3410-02 10-inch table saw might be the one which could meet your needs.

It is Ideal for DIY woodworkers looking to tackle bigger projects in and around the house. The foldable stand makes it more convenient for any room use and storage.

A 15amp powerful motor

This device is powered by a 15 amp motor with a 120 Volt power requirement which should be in any best table saw and is capable of tackling some heavy duty projects. It perfectly ripping through all verity of wood. Which is great for your work.

3-1/2-Inch Cut Height Capacity

The 3-1/2-inch cut height can cut through 4x the material in one go. This will surely help you in tackling various carpentry and woodworking projects.

EZ View Measurement System

The EZ view measurement system and self-aligning rip fence will provide more accurate settings and measurements.

Some other features and specifications of SKIL 3410-02 10-inch Table Saw

  • As the SKIL table saw cuts through materials that are 4 times the normal size. Therefore, instead of cutting each piece individually, you can align several materials to reach the height capacity for easy cutting.
  • If you are dealing with longer wood pieces the 20-Inch x 26-Inch cast aluminum table extends to 20-Inch x 32-Inch easily.
  • This model comes with Heavy-duty steel stand for fast setup and easy transport. Bevel Angle shift between 0° to 47°.
Pros
  • Easy setup and storage.
  • Features a 32-inch rip capacity.
  • Comes with steel folding
  • Aligning rip fence for accurate measurements and cutting.
  • Heavy duty material for durability.
Cons
  • Not enough miter gauge to accommodate extra long material.

Investing in SKIL 3410-02 10-inch table saw, will not only control your cutting but also upgrade your work to the next level of expertise even if you are just a beginner.

All you have to do is to set your wood and focus on your work. It’s easily transportable, easily adjustable, and also suitable for your bank account.

No.5 SawStop PCS175-TGP236 1.75-HP Table Saw

If you are in search for a high-quality cabinet saw, then SawStop PCS175-TGP236 1.75-HP might end your searching, if you take a close look on it.

For both craftsmen and hobbyists, this saw is Ideal. The SawStop 1.75 horsepower Professional Cabinet Saw delivers the performance that you need with the peace of mind and when it comes to safety and precision it does the job quite well.

The integrated blade carries a small electric signal. So when someone accidentally contacts with the spinning blade, the signal changes because of the skin conductivity and immediately stops the blade from doing any devastating injury.

A Professional T-Glide Fence

It comes with a professional 36-inch T-Glide Fence System which is constructed of the highest quality thick gauge steel.

It provides smooth operation, quality work surface, precision measurement and sure lockdown without any deflection, which is something you are looking for in the best table saw. Doing your work at the pro level, you can cut wood of any size without any re-adjustment.

99% Dust Collection

The Centers for Disease Control (CDC) has identified sawdust as a cancer-causing carcinogen.

SawStop addresses this safety hazard by providing the most complete solution available. Combined on a SawStop cabinet saw, it provides 99 percent dust collection both below and above the table.

Some other features and specifications of SawStop PCS175-TGP236 1.75-HP Table Saw

  • This model is compatible with 10-inch standard blades and 8-inch dado sets.
  • The Left tilted blade helps in to prevent the wood from binding against the fence.
  • It has a 110-volt power requirement which is great for the home shop as it delivers the convenience of plugging in anywhere.
  • Comes with a fully enclosed cabinet, industry-leading dust collection.
  • This unit is ideal for hobbyists, DIYers, and shops which has limited working space.
Pros
  • Always on protection to prevent serious injury.
  • Impressive dust collection technology.
  • High durability
  • Smooth repeatable cutting
Cons
  • Little expensive.
Nothing negative to say about this professional cabinet saw. It is one of the best tables saw we have seen so far. The safety system is amazing and with the 99% dust collection technology ensures that your workshop will remain clean and presentable at the end of the day.

Table Saw Buyers Guide

While buying a table saw that will provide quick and accurate wood cut, you have to consider the best one because who wants to waste a lot of money on a thing which is not able to perform the job correctly.

The main thing you have to keep in mind is its power. The best table saw should have enough power to cut through wet timber as well as hardwood.

However, there are some other certain features which are needed to be considered before selecting a table saw.

Types of Table Saw

Benchtop table saw:

As the name suggests, the benchtop table saw is designed to be used on top of a table or bench.

They are small in size so that you can place them on any table or bench and they’re also light enough to be carried from place-to-place.

This type of saw was originally meant for construction, but you can get good use out of it in your shop or garage.

The benefits of buying a benchtop table saw are it occupies small space, easily movable and available at a low price. On the other hand, the downside of a benchtop table saw is it doesn’t offer large ripping capacity.

So, if you are looking to cut down large lumber, it is better to look for a portable table saw.

Portable table saw:

The portable table saw ships with wheeled or folded leg variety. The wheeled models come with wheels that help the saw to roll from place to place.

While on another hand, the folded leg type may or may not come with wheels. However, both models feature a mechanism by the help of which they can be raised up and used without a table. This makes a huge difference between portable and benchtop models.

They are going to be heavier compared to the benchtop model. Due to their expanding frames, you can able to use them even in places where you don’t afford a table or bench.

The portable table saw is great for construction work or situations like if you’re going to work outside. This type of table tends to be a little bit bigger than the benchtop models and often has more rip capacity as well. So, if your job site is outdoor, then portable table saws are the best one to choose.

Contractor table saw:

The second major variety of table saw is the contractor. These table saws are comparably larger and heavier than the benchtop and portable ones.

It can portable but typically doesn’t feature folding parts or wheels. The usual designing involves a table saw mounted on a four-legged metal stand, which straddles the line between stability and weight.

These models tend to be a bit heavier, powerful and precise than the portable saws. Contractor saws are mainly used by hobbyists and DIYers because they can be plugged into a standard (home) electrical grid.

So if you are going to deal with some heavy work or work that requires more accuracy, then you can go for the contractor table saw.

Cabinet table saw:

These type table saws are not portable instead they are designed for used by professionals woodworkers. These table saws are heavy, accurate and have a lot of power to handle constant daily use.

They have more steel and cast iron in their bodies to order to increase their durability, which also means that they tend to be lower-vibration compared to other models, which leads to cleaner cuts.

Cabinet table features far more powerful motors than portable and the contractor saws. Since they are driven by the 3 to 5 HP motor, so they require a 220-volt circuit instead of your standard wall outlet.

These type saws come at a very high price. But if you’re a professional and you need a high-quality piece of equipment, this variety is the best table saw to choose. Keep in mind that you may have to do some rewiring in order to get these models working or call an electrician if you don’t know how to do.

Flatness:

The work surface needs to be flat. If you don’t buy a flat surface table saw, you are going to issues with your cut quality.

The deviation can be bear up to 0.005 inches. If you’re shopping online, don’t skip over the customer reviews read it carefully.

In most cases, customer reviews are the most trustworthy source of information to get a complete idea on that product.

Therefore, if you find any points mentioned about the Non-flat-surface of that particular model, then just avoid it.

Fence:

Another thing that makes the best table saw is the fence. It determines the accuracy and precision of the unit. The better the fence is, the better your work will turn out in the end.  So, it is certainly something you should be considered before buying a table saw.

Dust Collection:

The table saw produce lots of sawdust. Aren’t they? So you have to pay attention to the dust collecting feature of a particular model before purchasing it.

Some saws come with a feature that extracts the dust and pulls it away from the user. Whereas some other saw put extraction tool which works like a vacuum cleaner which draws the dust away from the saw and making your saw, dust free.

One important thing you should have to consider is the diameter of the dust port. The larger dust port is, the less sawdust you’ll have flying around.

In some models, this thing will lack due to the cost efficiency. However, if you are ready to invest a big amount, then feel free and purchase the high-end vacuum model.

Blade:

The blades are the primary factor to consider when looking for the best table saw as it hugely determines the performance of your table saw.

The blades will do a good job if they are placed at a correct depth of cut. The table saw will also perform best if only the correct blade is fitted for the cut, as a proper blade will help you to achieve an accurate and smooth cut.

So, When purchasing a table saw, go for the one with a correct setting blade.

On and Off Switch:

Though it seems quite unusual the position of On/Off button is important in a table saw.

In most of today’s models, you will find switch is generally leveled with your knees. The first thing you should look for is the size of the On/OFF switch.

It has to be big enough so that you can turn it off immediately either with your knees, elbows, or hands if anything went wrong.

If something unexpected happens, it’s always better to have a huge accessible button that cuts the power off immediately instead of having to look for it through a cloud of sawdust.

Beveling:

Table saws can cut a bevel by changing the angle of the blade. Many models include the option to change the blade angle in order to cut a bevel.

In most cases, you’ll have the option to change the blade angle between 0 degrees or 45°,50° and 90° to the table.

Keep in mind that when you start tilting the blade and reaching 45 degrees, the maximum depth of cut goes down.

Conclusion

No doubt, the investment on a table saw is definitely a big deal. But there are a lot of flexibility and options available to choose the one that not only fits in your budget but also gives the best performance.

So, before purchasing any table saw understand your needs and price that you can afford. In the above, we reviewed some best table saws which will help you to finish your work accurately and on time. You should follow our buyer’s guide before breaking your bank account for the best table saw. Thank For Visit GOTableSaw.

Best Table Saw Worth Purchasing in 2019
5 (100%) 41 vote[s]

2 thoughts on “Best Table Saw Worth Purchasing in 2019”

Leave a Comment